Marble Styles: Turban Fountain
 

Turban Fountain The 3-tier Turban Fountain is 60" high. The lower basin is 47" in diameter. Shown above in deep sea green marble. Also included: our proprietary fountain system/parts list with a Cal pump, and two interchangeable brass nozzles. Net weight: 1,300 lbs. Gross shipping weight is 1,800 lbs. Option: Lights. Available colors: white marble, bamboo green marble, and deep sea green marble.

Operating maintenance ranges from daily to every few days, when the fountain basin should be refilled and given a quick scrub. This procedure takes about 15 minutes. Refilling can be less frequent using a tank system, which would need to be refilled every few days. The tank system can be automated.

The Turban Fountain requires no cover in the winter. Snow and sleet are not a problem for our solid marble ornaments. Before winter, the fountain electrical system should be disconnected and the drain opened, and reconnected in the spring. This procedure takes a screwdriver and also about 15 minutes.

Installation requires manual excavation (similar in scope to planting a large tree), placing underground electrical conduit, access to a 115 volt GFIC-protected outlet, and using equipment (forklift, backhoe) to place the basin and pedestal. Comes with detailed instructions, including additional guidance by phone or e-mail. For further information, please see: Installation/Fountains.

On the left, an overhead view of our newly redesigned crown for the Turban Fountain. The flower leaves hide the brass nozzle from sight, as seen on the right (in deep sea green). The brass nozzle can barely be seen.

 
Marble Styles PO Box 40 Andreas, PA 18211 Tel: (570) 386-3455 | Fax: (570) 386-3029