Marble Styles: Traditional Fountain
 

Traditional Fountain Our Traditional Fountain is 41" high and 28" in diameter. Shown above in white marble. Also included: our proprietary fountain system/parts list with a Cal pump, and two interchangeable brass nozzles. Net weight: 250 lbs. Gross shipping weight is 400 lbs. Available colors: white marble, and deep sea green marble.

Operating maintenance ranges from daily to every few days, when the fountain basin should be refilled and given a quick scrub. This procedure takes about 10 minutes. Refilling can be less frequent using a tank system, which would need to be refilled every few days. The tank system can be automated.

The Traditional Fountain requires no cover in the winter. Snow and sleet are not a problem for our solid marble ornaments. Before winter, the fountain electrical system should be disconnected and the drain opened, and reconnected in the spring. This procedure takes a screwdriver and also about 15 minutes.

Installation requires manual excavation (similar in scope to planting a medium-sized tree), placing underground electrical conduit, access to a 115 volt GFIC-protected outlet, and two or three persons to place the pedestal and basin. Comes with detailed instructions, including additional guidance by phone or e-mail.

For further information, please see: Installation/Fountains

 
Marble Styles PO Box 40 Andreas, PA 18211 Tel: (570) 386-3455 | Fax: (570) 386-3029