FOUNTAIN SYSTEM

A fountain kit is included with every fountain.

PARTS LIST for 1-TIER FOUNTAINS (For the Ground Fountain parts list, please see next page.) (Left Photo) 1 - Cal™ S580 pump (2-year warranty), 120v, 180 watts, 20' power cord (available to 100') 1 - Intermatic™ 24-hour timer and outlet with GFIC ground fault 1 - solid brass nozzle 1 - 2" brass coupling 2 - ¾" brass clip 2 - 1" clamps, and all gaskets and fittings 1 - ball valve fitting 1 - ½" PVC threaded coupling 1 - PVC 90° elbow 1 - 2" PVC coupling 1 - ribbed bowl/drain seal fitting 1 - bulkhead fitting 1 - tube silicone 1- PVC primer and cement 1 - thread tape		(Right Photo) 1 - 14"d x 17"h pump enclosure with 10"d access cover 2 - 4' x 2" SCH40 PVC white pipe 1 - 4' x 1 ½" SCH40 PVC white pipe 1 - 4' x 1 ½" gray conduit pipe 1 - 5 ½' x 1 ½" curved gray conduit pipe 1 - 10' x ½" gray flex conduit 1 - 10' x ½" black tubing 1 - 3' x ¾" white/clear flex tubing 1 - 16" flex drain with PVC fittings 2 - black shields 1 - instruction manual * - assistance by telephone and e-mail

The two types of drain/nozzle stems and debris screens.

Left: The solid brass drain stem/nozzle base with a stainless steel clog-free debris screen, which is included with the Traditional Fountain, and other fountains without a central marble crown. Shown without a nozzle.

Center: For fountains that have a marble crown (i.e. Trumpet, Turban, Acorn), the stainless steel debris screen is recessed in the basin column. The nozzle is barely visible.

Right: The top of the marble crown with the solid brass nozzle stem/thread (without a nozzle in place). The debris screen and drain stem/nozzle base for the marble crown are pre-installed.

PARTS LIST FOR 2-tier and 3-TIER FOUNTAINS
To the above 1-tier fountain parts list add:
a. Larger capacity Cal™ pump matched to your fountain and application
b. Additional PVC pipe and fittings as required

INTERCHANGEABLE SOLID BRASS NOZZLES
The height of the spray can be controlled by adjusting the ball valve on the pump. The bubbler nozzle has the lowest rate of evaporation. The rate of evaporation increases with the number of holes, and flow rate. The jet nozzle and 4-hole, tier nozzle are included with every fountain. We can also make a custom nozzle to your specifications at an additional charge.

Two brass light fixtures and timer/transformer.

LIGHTS
2 - 3 ½" high x 3" diameter submersible solid brass light fixture with 20' of 12v wire, up to 100' at no extra charge
2 - MR-16 20w white light bulb
1 - Intermatic 120v-12v transformer and timer
1 - adapter installed on drain bulkhead (not shown)
1 - instruction manual
Optional: MR-16 with color wash LED bulb

FOUNTAIN SYSTEMS PAGE 1 2 3